Register Device Using Serial Communication

Applies to

TITANTOUCH 2SENSE 2MERGEMYCROMERGE CR
All DevicesAll DevicesAll DevicesAll DevicesAll DevicesAll Devices

Description

Device registration using serial communications (USB Aux, RS-232, and RS-485) is a very important and critical procedure for all Invixium products. There are two ways to register:

  1. Register device using USB Aux/RS-232
  2. Register device using USB RS-485

Register Device Using Serial Communication

Click the DEVICES tile >> Register Devices app. Application will redirect to Device Discovery window and the default settings will be displayed.

Register Device Using USB Aux/RS-232:

1. Click Serial to discover the device using serial communication. Select an appropriate COM port on which the device is connected and a Baud Rate can also be provided which is optional and can be kept as Auto.

2. Click Search which will display the progress bar till the “Search Result” ends

3. Click Register, to register the device in IXM WEB.

4. Upon completion, “Device registered” window with the device information will be displayed.

Register Device using USB RS-485:

1. Click Serial to discover the device using serial communication. Select the check box of RS-485, Start ID & End ID.

2. Click Search which will display the progress bar till the “Search Result” ends.

3. Click Register to register the device on IXM WEB.

4. Upon completion, “Device registered” window with the device information will be displayed.