Searching for devices on SSL using IXM WEB

Applies to

TITANTOUCH 2SENSE 2MERGEMYCROMERGE CR
All DevicesAll DevicesAll DevicesAll DevicesAll DevicesAll Devices

Description

User can discover SSL (Secure) devices in two ways:

1. Using Manual Device Discovery –While discovering SSL devices manually, the user must activate “Search on SSL” on the Device Discovery page.

2. Using Auto Device Discover – Auto discovery automatically identifies SSL devices as well as normal devices in the network. SSL devices show “Secured Ethernet” in Comm Mode.

Search SSL Device Using Manual Device Discovery

  • Click DEVICES tile >> Register Device app. Application will redirect to Device Discovery window.
  • In Device Discovery Window provide device IP range or specific device IP. Toggle “Search on SSL” to ACTIVE and click Search.
  • After 100% completion of the progress bar, application shows SSL devices with “Secured Ethernet” in Comm Mode.

Search SSL Device Using Auto Device Discovery

  • Click DEVICES tile >> Register Device app. Application will redirect to Device Discovery window.
  • Toggle “Auto Discover” to ACTIVE and click Search.
  • After 100% completion of the progress bar, the application shows the already registered devices with a “registered” status and the unregistered devices with an option to “Register”. If SSL is enabled on the device, then the device must show “Secure Ethernet” in Comm Mode.